Effects of annealing treatment on the properties of MEH-PPV/titania hybrids prepared via in situ sol-gel reaction

A uniform poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylenevinylene] (MEH-PPV)/titania hybrid film was successfully prepared by an in situ sol-gel reaction of titanium isopropoxide (TIP) in the presence of MEH-PPV/2-chlorophenol solution. The annealing treatment increased the conversion of TIP to titania as determined from evidence of the formation of Ti-O-Ti bonds in the Fourier transform infrared (FTIR) spectrum. Scanning electronic microscope (SEM) photographs showed that the morphology and distribution of titania in the hybrid film were strongly related to the amount of water in the in situ sol-gel reaction. The thermal stability of MEH-PPV/titania hybrids was enhanced by the annealing treatment. Small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) analyses indicated that annealing treatment promoted the ordered aggregation of the MEH-PPV chains and crystallization of titania to a certain extent. The blue shift in Ultraviolet-visible (UV-vis) absorption of pure MEH-PPV after annealing was ascribed to the small extent of decomposition and coil conformation which occurred at high temperature. A more-obvious blue shift for the hybrids was observed, which resulted from irregular aggregation and coil conformation of the MEH-PPV chains induced by heterogeneous point, TIP (titania). The red shift in the photoluminescent (PL) emission for pure MEH-PPV resulted from a certain extent of ordered aggregation after annealing. However, only a slight red shift in the PL emission peak for the hybrids was found due to the hindrance of ordered aggregation of MEH-PPV chains in the presence of TIP (titania).     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

Hydrothermal Synthesis and X‐Ray Structural Characterization of Manganese,Nickel, and Cadmium Coordination Polymers Containing 2,3‐Pyridinedicarboxylate as Multidentate Ligands

Three divalent transiton‐metal complexes of 2,3‐pyridinedicarboxylate (2,3‐pda²), [Mn(2,3‐pda)‐(H₂O)3]_∞ ( 7 ), [Ni(2,3‐pda)(H₂O)3]_∞ ( 8 ), and [Cd2(2,3‐pda)₂(H₂O)]_∞ ( 9 ) have been hydrothermally synthesized and structurally characterized. X‐ray diffraction analyses reveal that compounds 7 and 8 are zigzag‐ and linear‐type one‐dimension (1D) coordination polymers, respectively, whereas compound 9 is a three‐dimension (3D) coordination polymer. A simple comparison of the coordination geometries with the available neutral analogues {M_x(2,3‐pda)_x(H₂O)_y}_∞ containing one or two divalent transition‐metal atoms and equal ligands in the presence or absence of coordinated water molecules is also presented.     

Synthesis and structure of Mn(II) and Zn(II) complexes containing 1,10-phenanthroline unit

The Mn(II) and Zn(II) complexes of N,N′-diisopropyl-1,10-phenanthroline-2,9-dimethanamine have been synthesised, and the structure of the two complexes have been studied by X-ray crystallography.     

聚硅氧烷涂敷的反相高效液相色谱固定相

用甲基乙烯基聚硅氧烷涂敷于硅烷化的微粒硅胶上，制备出一种新型的涂敷型反相高效液相色谱固定相。该固定相对极性、非极性和碱性化合物均有良好的分离能力，峰对称性好。对其恶性循环 了考察，连续使用三个月后，固定相的碳量和色谱性能仍保持不变。     

2,6—二氯—4—溴偶氮胂光度法测定微量铀（Ⅵ）

本报道用了２，６－二氯－４－溴偶氮胂作显色剂测定微量铀（Ⅵ）的光度法。在Ｈ２ＳＯ４介质中，铀（Ⅵ与）２，６－二氯－４－溴偶氮胂形成１：２络合物，其λｍａｘ＝６４０ｎｍ；表观摩尔吸光系数为１．１×１０＾５Ｌ．ｍｏｌ＾－＾１．ｃｍ＾－＾１；铀的浓度在０．０－２２．０μｇ／ｍｌ内符合比耳定律。方法具有灵敏度高，选择性好，操作方便等特点并已用于废水及矿样中微量铀（Ⅵ）的测定。     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

Transient response of a Brownian particle with general damping

We study the transient response of a Brownian particle with general damping in a system of metastable potential well. The escape rate is evaluated as a function of time after an infinite wall is removed from the potential barrier. It takes a relaxation time for the rate to reach its limit value and this rate relaxation time differs from the relaxation time of the majority of the probability around the bottom of the potential well. The rate relaxation time is found to depend on the temperature as well as the damping constant. It involves the diffusion time and the instanton time, in general agreement with recent studies of the overdamped case by Bier et al. [Phys. Rev. E 59, 6422 (1999)].     

Large-scale synthesis of globotriose derivatives through recombinant E. coli

The carbohydrate chains decorating cell membranes and secreted proteins participate in a range of important biological processes. However, their ultimate significance and possible therapeutic potential have not been fully explored due to the lack of economical methods for their production. This study is an example of the use of a genetically engineered bacterial strain in the preparation of diverse oligosaccharides. Based on an ex vivo biosynthetic pathway, an artificial gene cluster was constructed by linking the genes of five associated enzymes on a plasmid vector. This plasmid was inserted into the E. coli NM522 strain to form globotriose-producing cells ('superbug' pLDR20-CKTUF). The specific strain was conveniently applied to the synthesis of globotriose trisaccharide and its derivatives, as potential neutralizers for Shiga toxin. This work demonstrates a novel and economical method for generating ligand diversity for carbohydrate drug development.     

电吸附技术的应用与研究

本文综述了活性炭、活性炭纤维、炭气凝胶及活性氧化铝等材料的电吸附/脱附技术的研究进展。主要介绍了其在去除水中无机和有机污染物方面的应用，并对今后的研究方向提出了建议。